Do It Yourself Swimming Pool Resurfacing

August 12, 2010 – 8:21 pm

Swimming pools are a wonderful addition to any backyard area. They provide a central place for entertainment for the whole family and they need to be kept in good repair in order to obtain full enjoyment of the structure. Swimming pool resurfacing is one of those maintenance tasks that are required to fully utilize your pool. Even a very well kept swimming pool will need some resurfacing maintenance after 15 years or so of use. The first question to ask yourself when you notice the finish on your pool cracking or coming apart is do you want to resurface or remodel your pool. A swimming pool resurface is just a cosmetic facelift where you reinstitute a solid finish on the interior of your pool. A remodel of your pool includes any changes that you want to make to any other area of your pool aside from the redoing of the surface area.

If you determine that resurfacing is the right thing for you, you need to then determine if you want to do it yourself or if you want professionals to do it. Professionals are always resurfacing swimming pools and have a lot of experience in that area and will do a good, guaranteed job of it. This would reduce a lot of stress from trying to do this yourself, especially if you have never done anything with pools before.

However, it is possible to do this yourself if you feel up to the task. Here are some tips and information on what is involved in a do it yourself pool resurfacing project to help you make an informed decision. First things first in order to begin your swimming pool resurface you have to drain your pool of water. One important thing to consider when draining your pool is that you need to be sure to call your city’s building and planning department to ask where you should drain your pool water legally. Before you actually drain your pool is sure to turn off all electrical equipment that powers items for your pool, like your pump so that they are not damaged when the pool is drained. After safely draining your pool if it is time to chip off all of the old plaster using a jack hammer. It is important to make sure all of the plaster is off of the pool so that the new material will stick to the cement. After getting the material off you need to use an acidic wash to ensure no materials are left on the pool wall. Then you mix your plaster and begin the swimming pools resurfacing process. Once the plaster is on and dried it is time to refill your pool. After reading these pool resurfacing tips if you still feel that you want to resurface your own pool, do some research and have at it.

Tags: , , , ,

Post a Comment